top of page

Vino Adhesive

Ultra Glue Vino Adhesive is a professional pressure-sensitive adhesive for resilient flooring. It bonds immediately with high initial tack, keeps flooring firmly in place, and is built for long-lasting performance.

Key Features

vino-adhesive-bucket-studio.jpg
    Pressure sensitive — bonds immediately, no open time
    High tack & peel strength — keeps flooring in place
    Moisture resistant — ideal for most subfloors
    Low odor — safe & easy to work with, for indoor use

Great for traffic areas — residential & commercial

  • 4 gal (15.14 L) bucket

Suitable For

Vinyl sheet, luxury vinyl tile (LVT), vinyl composition tile (VCT), linoleum, rubber flooring, carpet tiles (with proper backing). Interior use.

INSTALLATION GUIDELINES

Surface preparation

  • • Substrate must be clean, dry, structurally sound, and free of dust, dirt, oil, grease, paint, sealers and loose particles.
    • Flat to 3/16 inch in a 10-foot span.
    • Use only when the substrate temperature is between 50°F and 90°F (10°C–32°C).

Application

  • • Stir adhesive well before use.
    • Spread evenly using the recommended trowel or roller, holding the trowel at a 45-degree angle to the subfloor.
    • Recommended tools: 1/16 inch square-notch trowel for porous substrates; 1/16 inch U-notch trowel for nonporous substrates; 1/4 inch nap roller for roller application.

Flash time and working time

  • • Nonporous substrates: allow 30 minutes to 1 hour, until dry to the touch, before laying flooring. Do not lay flooring into wet adhesive on nonporous surfaces.
    • Porous substrates: flooring may be laid into semi-wet adhesive, or allow 30 minutes to 1 hour until dry with no transfer when touched.
    • Working time up to 12 hours — only spread as much adhesive as can be covered with flooring within 12 hours.

Finishing

  • • Roll the finished floor with a 100 lb roller, across both the width and length.
    • Coverage: 250–300 sq ft per gallon (1,000–1,200 sq ft per 4-gallon bucket).
    • Protect the installation from light traffic for 12 hours and heavy traffic for 24 hours.
    • Cleanup: water while the adhesive is wet; mineral spirits once dried.

Coverage
Up to 250–300 sq ft per gallon (coverage may vary depending on substrate and trowel used).
Trowel recommendation
1/16" x 1/32" x 1/32" square notch trowel.

Vino Adhesive FAQ

What flooring types work with Vino Adhesive?

Vinyl sheet, LVT, VCT, linoleum, rubber flooring, and carpet tiles (with proper backing).

What coverage can I expect?

Up to 250–300 sq ft per gallon; coverage varies by substrate and trowel.

Is it for interior or exterior use?

Interior use.

bottom of page